*need help finding 1983 250R rear axle*

[bumsted200s]

I am looking for a 2nd gen 250R rear axle assembly (everything but the sprocket). I know most of the other Honda models well, just new to 250R. I am a big eBay-er and have searched/bid on the few that come up here n there. Other than buying some fancy durablue for several hundred, anyone know if there's another solution?

Does anyone if any other year/model axle will fit?

Picture attached is how it sits now, bought it not running (still working on that part too) but rear axle wobbles bad on each side. I already put in new dual bearing carrier.


Brian

my wheelers:
1981 Honda 200 5-wheeler
1983 Honda 200
1982 Honda 185S
1983 Honda 250R
1984 Honda 200S
1985 Honda 200X
1987 Honda 250SX

[Scootertrash]

What about having it straightened?


ETA: The axle wobbles bad or the hubs wobble on the axle?

[Ol Deuce]

I'm running the '84r axle in my '86 200x if ya want you get me the '86 200x axle and I will trade ya ! How about that!:Bounce:Bounce:Bounce:crazy: ..................Ol Deuce

[oscarmayer]

the way it looks and seems like you ride, there is a reason the stock axles bend. they are junk. get a aftermarket axle and be done with it.

[nicker71]

Look at this on eBay:

http://www.ebay.com/ulk/itm/182107660308

1983 1984 Honda ATC 250r extended rear axle ATC250R

[Dirtcrasher]

^ Thats a nice one!!

[oscarmayer]

Look at this on eBay:

http://www.ebay.com/ulk/itm/182107660308

1983 1984 Honda ATC 250r extended rear axle ATC250R

this is an old skewl durablu axle! get it!!!

[atc300r]

I have an extra I will post some pics of it later today.

[bumsted200s]

What about having it straightened?


ETA: The axle wobbles bad or the hubs wobble on the axle?


Yes it crossed my mind. Two problems: I don't know of anyone who could. And also the threads are all junk for castle nuts, like beyond anything a tap/die set could fix. It clearly looks like bent axle (both sides) Brakes were seized when I bought it so wasn't until I fixed carrier and spun it by hand

[bumsted200s]

I have an extra I will post some pics of it later today.


Oh ok, ya that would be great. I will wait for a pic then

[bumsted200s]

this is an old skewl durablu axle! get it!!!

Yes I saw this over a week ago. I didn't know enough about it to know one way or another (still pretty new to 250R). It's a plan B or C, wasn't planning on investing that much on 1 piece

[bumsted200s]

the way it looks and seems like you ride, there is a reason the stock axles bend. they are junk. get a aftermarket axle and be done with it.

I tend to think the sameway, my problem is what appeared to be a great find @ $400 bucks has now turned into a $600+ parts investment to even get it driveable. Playing this one safe, if its not worth it i'll just sell to break even.

[bumsted200s]

I'm running the '84r axle in my '86 200x if ya want you get me the '86 200x axle and I will trade ya ! How about that!:Bounce:Bounce:Bounce:crazy: ..................Ol Deuce

I had read somewhere on here while back, that someone used a '86 200X axle in one. Didn't know how much to trust it, and they're same width and everything eh?

[atc300r]

Sorry Im late on these pics.Phone battery pooped out lastnight. The hub thread second pic are slightly dinged second pic.I bought this axle in the early 90s as a spare.Its from a 84 250r.231186 231187

[ATCT]

I have one if you still need it. Shoot me a PM if so.