PDA

View Full Version : 200x cams


atc110addict
05-01-2016, 09:44 PM
https://www.atcheaven.com/product/camshaft-mid-range-atc185s-atc200eesms-atc200x/ Does anyone have any experiences with these? I am thinking about buying one because I would like a little more lower-midrange power in my X.
1979atc
05-01-2016, 09:52 PM
Don't seem like to bad of a price. Maybe I should get one for my Xr 200.
shortline10
05-02-2016, 07:03 AM
Just be carful , I purchased one a while back and the pin hole for the advancer was about 10 degrees off :(
Had to send it back , the lift was the same as a stock 200x cam and had just a little more duration , not an upgrade IMO .
Scootertrash
05-02-2016, 08:17 AM
Good to know, thanks shortline!

How would the XR200 cam compare to the one in the link? The price is comparable.
1979atc
05-02-2016, 09:02 AM
Good to know, thanks shortline!

How would the XR200 cam compare to the one in the link? The price is comparable.

I have a 1988 xr 200, the bottom end is a Atc 200x transmission and crank. The cylinder is bored 40 over and has the Atc 200x head and valve cover which would compare to the cam on the link. I was looking to increase the power I have a bigger carb and that's all at this moment. Now I will keep looking, due to this cam in the link is a bad cam.
Mackus84
05-02-2016, 09:25 AM
Brand NEW Xr200 1986-2002 cams part# 14101-446-000 are still available. No need for a used one or one made by someone we have no clue who they are. Id rather have Honda OEM and can be had for less than $80 bucks
oscarmayer
05-02-2016, 09:02 PM
Why not go to web camshaft a and get s came made for your trike? Then you know exactly what you have as well as it will work way better than an XR. You will not feel much of a difference between the XR and stock cam. So why waste $?


Sent from my iPhone using Tapatalk
Leevvii
08-05-2016, 10:34 AM
Do you know if they ship to Australia, Only a phone# and a snail mail address on their website, do they only sell through distrib's, ?
Dirtcrasher
08-05-2016, 01:17 PM
Webcamshafts are not cheap.

You will have to use different springs and Ti retainers, have the rockers hard welded and for it to work the best it can, a 10.25:1 higher compression piston and a better flowing exhaust.
RUNMEDOWN
08-05-2016, 06:25 PM
79 XL185 cam. Cheap and more lift and duration.