Honda ATC 250ES Clutch locknut

[UncleJerm76]

I took these things apart way to long ago and don't remember the direction they go back on. :P

They have a small sleeve on them, are those designed to crush against the washer facing inside? I assumed the washer fit over top of the sleeve but they don't.
http://uploads.tapatalk-cdn.com/20160622/9d43c5be14a4639ea8a41d7886c16454.jpg


...Tools ...Toys (same thing) :)

[Rob Canadian]

232855

Does this help?

[UncleJerm76]

Thanks Rob but it's difficult to tell for sure from the diagram (that was the first place I looked, it's #16) - I was hoping someone remembered from when they took theirs off.


...Tools ...Toys (same thing) :)

[UncleJerm76]

The shop manual doesn't specify direction either, which is odd considering this is a specialized one way bolt!
http://uploads.tapatalk-cdn.com/20160623/d8f116603630aedbbc54b288114e5f6f.jpg


...Tools ...Toys (same thing) :)

[wonderboy]

That's not a crush sleeve. That extended sleeve portion should be away from the washer that you tighten up against. The point of that sleeve is that you will use a punch and dimple that sleeve over a hole in the shaft to form a locking mechanism.

[wonderboy]

I did a quick google search just to show you the idea of staking that locknut. Here is a guy's webpage where he shows the locknut staked (dimpled down into the groove of the shaft).
http://www.mytriplogs.com/share_trip_log.aspx?user=3JB&trip_log=2002_VLX_Clutch_Plate_Install_How_To&trip_log_node=blog

It's the 4th picture down from the top.

[UncleJerm76]

That makes perfect sense! Thank you very much


...Tools ...Toys (same thing) :)