Tecate Question

[Queef Chief]

I have some thick flanged Yamaha wheels for the rear of my '85, and the factory studs only stick through 2 or 3 threads. Where are you guys getting longer studs for situations like mine? I'm sure there are several other bikes that cross reference perfectly, so I figured I'd ask the gurus.


Sent from my iPhone using Tapatalk

[barnett468]

.
You can find something that will work in the link below then order them from NAPA Auto Parts etc . Metric is listed after the US sizes.

http://static.dormanproducts.com/document/WheelLugStudAttributes.pdf


PREVIOUS KAWASAKI INTERNATIONAL R & D PROJECT ENGINEER AND ATV DEPARTMENT SUPERVISOR

[Queef Chief]

.
You can find something that will work in the link below then order them from NAPA Auto Parts etc . Metric is listed after the US sizes.

http://static.dormanproducts.com/document/WheelLugStudAttributes.pdf


PREVIOUS KAWASAKI INTERNATIONAL R & D PROJECT ENGINEER AND ATV DEPARTMENT SUPERVISOR

Thanks Barnett. I ended up going to NAPA and talked to them about the size I needed, but apparently his book didn't go below M12 lug studs and he acted like he couldn't get them.
I ended up finding Polaris M10 x 1.25 x 58 wheel studs that will work.


Sent from my iPhone using Tapatalk