PDA

View Full Version : 1985 250SX ID these parts?



MPDano
10-30-2016, 07:01 PM
Guys,

Not sure where this goes, but it was in my bucket of parts that came with the trike.

Also, on the 2nd pic, where does this air line hook up to? It's coming from the rear diff.

The 3rd pic, what are you guys using for the air hose that goes from the air filter to the frame?

236417

236418

236419

fabiodriven
10-30-2016, 07:26 PM
First picture is rear fender supports.

Air line from rear end is a vent. Put it somewhere up high where water won't get in.

Hopper055
10-30-2016, 08:00 PM
First picture looks like fender supports. Second picture I'm not sure I think it just routes up high on the fame you might be able to find it in the manual. The last picture there are a couple of them on ebay right now for arround $45.I searched "air box boot". You might be able to take your air box into an auto parts store and ask to look at radiator hoses and find one that'll fit and be flexible enough.


Looks like Fabio beat me to it.

Herboso
10-30-2016, 08:55 PM
Yep. 100% positive the first pic are the fender supports. I also just looked at my sx and that breather hose for the rear dif is attached with cable ties and runs up along the frame to under the seat. The missing air intake hose might be a hard part to find so as mentioned above, you will probably have to make use of a radiator hose or similar. I would try to find a thin corrugated rubber hose. The OEM part is pretty thin rubber so you don't need a thick or heavy duty hose. Thinner will be more flexible and easier to deal with.

MPDano
10-30-2016, 10:43 PM
Thanks guys. Will see if I can find a pic of the fender supports mounted.

MPDano
10-30-2016, 10:49 PM
Found a pic of it mounted. Thanks for steering me in the right direction.

236442