another R for sale

[GASGAS]

http://m.ebay.com/itm/272523493632?_trkparms=pageci:07a04d54-dc02-11e6-9dfb-74dbd1a0b7d1%7Cparentrq:a7ef4fc81590a357cdaa554cff b654ee%7Ciid:2&_mwBanner=1

[Mr. Clean]

Jeremy (Vegas250RR) built this trike......hmmmmmmmm, and I put a ton of work into as well. It was called "Lost Wages", I will find the build thread.

1985 Honda ATC 250R If you are looking for a near perfect Honda ATC 250R I have one for you.trailpro This trike has been completely taken apart and rebuilt.trailpro We had the engine rebuilt both lower and top end. We used Hot Rods complete bottom End Kit. trailproWe went with 50 over Wiseco piston and rings. trailproWe currently run 110 octane gas with an oil mixture of 32:1 in it because she smells and runs the best.trailpro The front forks were resealed, the bearings in the triple tree were replaced.trailpro We use Engine Ice coolant.trailpro Both front and rear calipers were rebuilt with new seal kits. New brake pads were installed.trailpro We rebuilt both the front and rear master cylinders.trailpro We added ITP .190 polished aluminum wheels with 20x11-9 rear and 22x7-10 front tires. We installed a wider rear axle and housing bearings.trailpro We had a ESR performance exhaust system added and the Keihin carburetortrailpro was jetted properly. We finished this trike off with a super bright LED headlight for night riding.trailpro This is a fully restored 1985 Honda ATC 250R . trailproThis bike has been completely disassembled and every part has been meticulously gone through! trailproI personally have over $5000 in the this trike and hundreds of hours of work . Bike is near perfect and is very well-built!

[captainweezy]

Beautiful R

[GASGAS]

Looks like auction was stopped!

[Mr. Clean]

Pics from EBAY.

[vegas250rr]

WOW! she rears her head! and in Florida of all places...Cant believe he cut that desert bar!!!!! :mad::mad::mad::mad::mad: Love how he says "WE" in everything that was done to the bike and how the top and bottom end were completely gone through with HOT ROD cranks and what not....

Think I will message the guy and tell him to peel my stickers off the bike if he plans to continue miss representing what it is!

I know he didnt get into that motor, the paint isnt even cracked... Dont get me wrong the bike was plenty strong, but it is not what he claims!

Dont be fooled by this guy... I did all the tear down and rebuild with the help of Mr. Clean and Mr. Richard for the parts.
and I have the pictures to prove it.23978223978323978423978523978623978723978823978 9239790239791239792239793239794239795239796

[vegas250rr]

sent the lister a message ....

Have receipts for the motor work? If you don't I would request that you take my name off of this bike... I am asking you privately as a courtesy... but I will not stand for my name to be on a bike that is misrepresented to the public. your photos don't show that the cases have every been split and this bike build is all over the internet. feel free to search "lost Wages". The triking community knows all about this bike and those that would be serious buyers at your price are going to do their homework.

[vegas250rr]

239831
I really dont know how to respond to this guy... but to call him a DOUCHE!

I have no idea what type of damage was done to the bike in the last 4 some odd years that it has been in other hands,
but to say I did shitty work because the axle was bent, the forks needed new seals and the carb wasn't jetted for sea level is completely preposterous!
"it looks like you spray painted the engine and frame"??? REALLY what a complete idiot!
No bearings in headset? does this guy think I would really put that much into a build and NOT install bearings into the steering stem? (like nobody's going to notice?!!!)
and A frozen Main bearing? well I just don't know how to face that one.... it ran beautifully when it was sold 4+ years ago.

[Aulbaugh]

I think you summed it up with that one word Vegas! The seller probably doesn't know what he is talking about and had his mechanic type up his feebay listing for him. It sucks the seller has to be like that. Nice build pictures btw!

[yaegerb]

239831
I really dont know how to respond to this guy... but to call him a DOUCHE!

I have no idea what type of damage was done to the bike in the last 4 some odd years that it has been in other hands,
but to say I did shitty work because the axle was bent, the forks needed new seals and the carb wasn't jetted for sea level is completely preposterous!
"it looks like you spray painted the engine and frame"??? REALLY what a complete idiot!
No bearings in headset? does this guy think I would really put that much into a build and NOT install bearings into the steering stem? (like nobody's going to notice?!!!)
and A frozen Main bearing? well I just don't know how to face that one.... it ran beautifully when it was sold 4+ years ago.

4 years ago? I thought you just sold this bike????

[vegas250rr]

Haha nope she's been gone a while. His "rebuild"is a sham

That paint looks good for a "spray can " huh?

[yaegerb]

Haha nope she's been gone a while. His "rebuild"is a sham

That paint looks good for a "spray can " huh?

Yeah that guy is something else. I loved that bike when you sold it.

[Mr. Clean]

All I can say is wow, this guy is a piece of garbage. If the paint on the motor is spray bomb then why did he not blast and repaint. It was done with automotive urethane paint.

[vegas250rr]

Frame was powder coat. Motor was paint