86 Tecate fender hardware question

[fordnut79@hotma]

I'm trying to get the hardware all ordered for my 86 Tecate rear fenders. I'm confused by which rubber dampers to buy and how many. 92075a and 92075b in the bikebandit diagram. http://www.bikebandit.com/oem-parts/1986-kawasaki-tecate-kxt250b/o/m150393#sch429918 239540

There appears to be 7 square ones needed but I'm not sure how many of each or the proper location. anyone have any insight or better pics ?

239539

[Murray8503]

You need 92075. 7 total just like the fender you have pictured. 92075A is the heat shield black plastic square piece and 92075B is the grommets used to attach the fenders to the fender support.

[nstyle73]

92075a (7), Unless you have original fenders, there will not be mounting holes for 92075B. The original fenders and the NOS replacement fenders are not the same.

[Murray8503]

Wrong. 92075a is the little black heat shield on original fenders. 92075 is the seat grommets and 92075b is the ones that go where the fenders attach to the rear fender support bracket.

[nstyle73]

Did you look at the parts fiche he attached? 92075 is the rubber damper that inserts through the decal isolating the fender from the fender brace. 92075a are the 7 rectangular bumpers. OEM part #92075-1153, "Seat Damper". 92075 is OEM #92075-222, the rubber insert for the fender brace mounting.

[Murray8503]

Your right, I apologize. I was looking at a 87 fiche. Same exact parts but different numbers.
http://www.2wheelpros.com/oem-parts/1987-kawasaki-tecate-kxt250-b2-fenders-assembly.html