PDA

View Full Version : ID my 350x stator


blkstangman88
02-26-2017, 08:39 PM
Hey guys, ive read the 85 and 86 350s came with different stators and fly wheels. its my belief the owner before me installed a 85 fly wheel (big version) with a 86 stator. can anyone verify this for me. i have a pretty significant gap between the flywheel and the stator, about .170 in. the stator has been tested and is good.

i started looking into this problem since i was not getting any volts from the stator and 0 volts from the regulator and the trike runs fine.
Mickey Dunlap
02-26-2017, 09:04 PM
Hey guys, ive read the 85 and 86 350s came with different stators and fly wheels. its my belief the owner before me installed a 85 fly wheel (big version) with a 86 stator. can anyone verify this for me. i have a pretty significant gap between the flywheel and the stator, about .170 in. the stator has been tested and is good.

i started looking into this problem since i was not getting any volts from the stator and 0 volts from the regulator and the trike runs fine.

That's the wrong flywheel.
blkstangman88
02-26-2017, 09:13 PM
Perfect. 86 fly wheel is ordered. Thanks
Mickey Dunlap
02-27-2017, 12:16 PM
Perfect. 86 fly wheel is ordered. Thanks


240123

Make sure it looks like the one on the left.