1984 200x creaking noises

[HON-DUH]

Have a 84 200x that has always made annoying creaking sounds since i bought it. Can't seem to figure out exactly where it is coming from although i suspect it could possibly be a swingarm bushing issue or something with the rear shock. Has anyone else experienced something like this? I can literally put one finger on the seat with light pressure and it will creak. Drives me nuts!

[ironchop]

Pull the swingarm bolt and check those bearings in the swingarm. I would do that before I looked at the pivot points for the shock

Sent from my Z958 using Tapatalk

[jb2wheels]

My 85 350X was squealing for mercy every time I got on it.

Still did it after pulling, cleaning and re-greasing swing arm pivot.

I ended up cleaning and greasing the upper shock mount/ball to fix the problem.

Now I need to do the T3 but it's on my trailprotrailprotrailprotrailprotrailpro list since it came back from the dunes on a rope behind a 400EX when the stator crapped out. And then, started right up in camp.

[HON-DUH]

Good idea. I'll give it a shot and see how it goes

[yaegerb]

Now I need to do the T3 but it's on my trailprotrailprotrailprotrailprotrailpro list since it came back from the dunes on a rope behind a 400EX when the stator crapped out. And then, started right up in camp.

Say it ain’t so!!!!!

[ironchop]

...
Now I need to do the T3 but it's on my trailprotrailprotrailprotrailprotrailpro list since it came back from the dunes on a rope behind a 400EX when the stator crapped out. And then, started right up in camp.....
It's mocking you. Don't you hate that?


Sent from my Z958 using Tapatalk

[jb2wheels]

Say it ain’t so!!!!!



It's mocking you. Don't you hate that?


Little green trailprotrailprotrailprotrailprotrailprotrailprotr ailpro usually performs flawlessly. Bald knobbies and all.