PDA

View Full Version : My LED replacement Light for the 350x Bezel


Curtie223
07-04-2018, 01:17 AM
Well with no one having an answer on replacement lights I improvised. I found a set of flush mount LED lights that were very close to the same measurement of the stock lights. Some slight modifications to the lights(cutting down the sides of each light) they fit right in. I used 3M mounting tape around the inside of the bezel for the lights to fit against. Then I grabbed a BigRed tail light retainer to tightly hold them in place. The top is screwed into the wood piece. The bottom 2 holes are almost the same as the adjustment holes. So a couple of bolts and it was secured. https://uploads.tapatalk-cdn.com/20180704/6e6e8dbd8e58a85f3ae89dbbab55f84d.jpghttps://uploads.tapatalk-cdn.com/20180704/35dd3f2543b8031e0fe846e5cc2a62e6.jpghttps://uploads.tapatalk-cdn.com/20180704/fd0886a742238eee00b8b87dd84ebbe1.jpghttps://uploads.tapatalk-cdn.com/20180704/aea963bd42a007f61b6480b5ba3dae37.jpghttps://uploads.tapatalk-cdn.com/20180704/2af3764c147a40736a5fb6ae00376f41.jpg


Sent from my iPhone using Tapatalk
Scootertrash
07-04-2018, 08:20 AM
Nice job!

Am I correct in assumiong that Big Red talk is Big Red stock?
Curtie223
07-04-2018, 11:13 AM
Nice job!

Am I correct in assumiong that Big Red talk is Big Red stock?

Sorry I fixed it. Supposed to be BigRed tail Light


Sent from my iPhone using Tapatalk
Dirtcrasher
07-04-2018, 01:48 PM
Those look nice! Lots brighter?? Cost/link??
Curtie223
07-04-2018, 01:49 PM
Those look nice! Lots brighter?? Cost/link??

Immensely brighter. Just some eBay led’s https://uploads.tapatalk-cdn.com/20180704/7d7f27183e40e04a623598c0905b3fdb.jpg


Sent from my iPhone using Tapatalk
oldskool83
07-04-2018, 06:17 PM
Led is best if you wanna see nowdays. I don't even use factory lights anymore. Nice ones like these or handle strips are best.
TheRealFatShady
07-05-2018, 12:46 PM
very cool. any issues with the electrical or did they work as they are?
Curtie223
07-05-2018, 08:58 PM
very cool. any issues with the electrical or did they work as they are?

They work as they are. They flicker a bit at idle. The correct way is to rewire the stator to an open loop system, add a battery and regulator. But so far it’s working like it is.


Sent from my iPhone using Tapatalk