Atc 250r 84’ dampener bushes

[oldoo]

Hey guys
I have a nos 84’ air cooled 250r axle but the bushes have been punched out where the sprocket bolts to. What are my Options?
I could have some machines out of delrin but I would rather have the rubber oem style ones.

I am sure that there is another machine/bike/plant vehicle that uses the same size dampener??

Cheers


Sent from my iPhone using Tapatalk

[Shep1970]

The only bushing I’ve found to be remotely close is this China one, except it’s 28mm OD and 27mm is needed other #’s match up. If you knew someone with a lathe it could be made to work providing enough metal was left on the OD of bushing. And at only $3 dollars each it may be worth a shot. I don’t have a link but I think the site is on the picture.
255326

Shep

Here the link- https://www.vmcchineseparts.com/search

I know- there Chinese but maybe worth a shot.........type in bushings in search bar

[oldoo]

The only bushing I’ve found to be remotely close is this China one, except it’s 28mm OD and 27mm is needed other #’s match up. If you knew someone with a lathe it could be made to work providing enough metal was left on the OD of bushing. And at only $3 dollars each it may be worth a shot. I don’t have a link but I think the site is on the picture.
255326

Shep

Here the link- https://www.vmcchineseparts.com/search

I know- there Chinese but maybe worth a shot.........type in bushings in search bar

Thanks for your reply. I have access to a lathe but that website does not ship to Australia

Still stuck with what to do


Sent from my iPhone using Tapatalk

[ironchop]

I wonder if those are the same size as the ones they use on 200X in 83-85



Sent from my Z958 using Tapatalk

[Shep1970]

This is the part# for the 83-85 200x bushing 41241-307-010 it fits lots and lots of bikes but the OD is only 24mm so it’s
not fitting the 83/84 250r:cry: wish it was —- I like puzzles I will keep looking

Shep

[oldoo]

This is the part# for the 83-85 200x bushing 41241-307-010 it fits lots and lots of bikes but the OD is only 24mm so it’s
not fitting the 83/84 250r:cry: wish it was —- I like puzzles I will keep looking

Shep

Cheers mate
Hopefully my other axle will be reassembled and I can use that Permanently.

But for now I’m going to get some delrin bushes made up, I feel that will be ok for a temporary solution?

Cheers,
Oldo


Sent from my iPhone using Tapatalk

[oldoo]

All sorted fellas
I got my machinist mate to turn up some delrin ones.
https://uploads.tapatalk-cdn.com/20181125/ffb2283adaabaf1d4496d718f6646fbf.jpg


Sent from my iPhone using Tapatalk