83/84 250R forks that mimic the Terry Cable kit!! CHEAP!!! GET SOME!!

[Dirtcrasher]

Guys, IDK if you're aware but if you use 83/84 250R damping rods in the 85/86 350X, it is very similar to the "terry Kit" available back in the day. It raises or lowers oil hole heights as well as the diameter.

It's the cheapest upgrade for your buck and you can rebuild your forks at this time.

It improves fork action with damping.

These are in CA and 60$ shipped, if I had a 350X in need, they'd be mine...

https://www.ebay.com/itm/1983-83-HONDA-ATC250R-ATC250-ATC-250R-250-FORKS-SET-FOR-PARTS-ONLY/233100434925?hash=item3645de5ded:g:s9sAAOSwg-tcQmdv:rk:26:pf:0

GOODBYE!!

[fabiodriven]

Those are so cheap I'm tempted to buy them. He says for parts only but doesn't say what's wrong with them.

[twomanytoys]

I just did this swap on my 350x. I had some bent fork tubes so scored a nice set of 250r forks on ebay. Used everything but the lowers. MUCH better valving! And I think a bit more overall travel!

All torn down ready for parts swapping.
257021

350x stock on right/250r on left
257022

Done.
257023

[Dirtcrasher]

^NICE!! Glad to see someone doing the swap!!

All I saw was light pitting on the top, wouldn't affect the seal area thou...