Need some info regarding 1983 yt125 engine

[nmarciano19]

So im in the process of fixing up my engine (new seals, bearings, gaskets). I have looked on bike bandit for the seals (already have everything else). Im looking at the crank seals and see 2 types listed. Is one for the wet side ( clutch) and one for dry(flywheel). Also should i put anything on them when putting them in like rtv or such. Already have yamabond 4 for the crankcase.

Sent from my SM-J727U using Tapatalk

[barnett468]

You should post this in trikesylvania or the new member forum.

I use oil on the od and sometimes grease on the id.

Yes, one seal is for the mag/stator side and the other is for the clutch side.

.