84 250r parts..

[Jackrwesty]

Hello all again, ran into a couple issues in my rebuild. Found out I'm missing the break return spring, rear brake caliper mount, rear brake fluid reservoir . Now I've searched everywhere I could and could not find the brake mount, or the reservoir anywhere . I found one return spring but it was $30 and that seems ridiculous lol. Anyone know where to find these parts that I cant find , they dont need to be OEM. And also is there parts from other years or models that may work ? Thank you all again

[ATCKevin]

I was in the same boat last year with my 84. I was missing the rear caliper bracket and caliper. The bracket would be so easy to make if you had one to copy on a plas table. I was at mercy to eBay. I bought a bracket and caliper together ($200) [emoji58]. I had no other choice. I was missing the brake pedal and spring as well. I got lucky and got both together on eBay for $10. I had no master or reservoir either. I got one of the cheap POS ones on amazon. I figured if it was complete piece of crap I was only out 8 bucks. The master cylinder worked, just had to drill the mounting holes out for the holes to line up. It’s been on there a year and I haven’t had any issues with it. Watch eBay is my best advice.


Sent from my iPad using Tapatalk

[Jackrwesty]

Well I found a bracket on craigslist for $35 so that's lucky!! Then I only see one spring but its $30!damn. Then i think I'll just get a cheap oil reservoir and make it fit lol. Thanks !


Now I realized I am missing the exhaust manifold and the carb insulator too!dang I keep hitting snags. Any advise on those 2 parts ??


Thanks

[Shep1970]

I didn’t see this until now, I believe I have a 83/84 250r rear caliper bracket at just shipping cost. May be too late for you but for someone in the future reading this post pm me. Comes with rear caliper too, needs rebuild I am very sure......

Shep

[Jackrwesty]

Wow thanks!! The guy on craigslist now has gone silent on me and now I'm back at square one so I would be interested in it still. I PM 'd you ! Thanks!

[Shep1970]

Ok, I’ll be in touch about dinner time tonight. Won’t be home till then.

Shep

[Jwheeler]

Wow thanks!! The guy on craigslist now has gone silent on me and now I'm back at square one so I would be interested in it still. I PM 'd you ! Thanks!

Hey Jack where in So Cal are you located at ?

[Jackrwesty]

I'm in Huntington Beach , Orange County California

[Shep1970]

Sorry guy, looking from the back I believed this to be a left side rear caliper so I assumed 83/84 250r. After looking at a parts diagram im
not sure what it is/ I should have investigated it further before getting your hopes up......sorry:)
260076 260077 260078

Shep