ATC70 Clark gastank Petcock options?

[Quinc]

broke off the cheap plastic petcock and hoping someone has found a better option? Thinking I might be able to thread a couple of brass npt fittings in there as well.

https://www.planetminis.com/attachments/effects-3-jpg.271166/

[MrConcdid]

I have read the reviews on those tanks, and that is a major failure point on them.
It may be possible to heat the tank (empty and washed) just enough to soften the plastic and then thread a brass bung into place.
then you would have a brass fitting to work with after the plastic has cooled.

I have had very good luck with a heat gun on Honda plastic fenders and PVC pipe.
MrC.

[shortline10]

Someone needs to make them out of billet aluminum . I would be in for a half dozen .
They all fail eventually , big problem .

[ironchop]

Someone needs to make them out of billet aluminum . I would be in for a half dozen .
They all fail eventually , big problem .What do they look like?

if you're serious, text me.... Seriously

Sent from my Z958 using Tapatalk

[shortline10]

Here you go Doug .



What do they look like?

if you're serious, text me.... Seriously

Sent from my Z958 using Tapatalk

[ironchop]

Here you go Doug .That's it? No valve?

Sent from my Z958 using Tapatalk

[shortline10]

Yep that’s it , simple part .
Bolts to the bottom of the tank and two fat o-rings seal it .
Problem is , the plastic warps over time and the o-rings can’t seal tightly , or it just cracks near the nipples .

[Quinc]

brand new tank and broke both nipples broke off while removing the fuel line.. Anyone try one of the aftermarket petcocks?

https://clarkemfg.com/product-category/motorcycle-accessories-upgrades/aftermarket-petcock/

https://content.motosport.com/images/items/large/CKE/CKE0004/X001-Y001.jpg

[shortline10]

I don’t see how that style would even work when the original style has 2 holes into the fuel tank for on and reserve .

https://clarkemfg.com/catalog/motorcycle-accessories-upgrades/aftermarket-petcock/1377ns90-02-grooved/

[ironchop]

brand new tank and broke both nipples broke off while removing the fuel line.. Anyone try one of the aftermarket petcocks?

https://clarkemfg.com/product-category/motorcycle-accessories-upgrades/aftermarket-petcock/

https://content.motosport.com/images/items/large/CKE/CKE0004/X001-Y001.jpgI used that petcock on a early 200X Clarke tank. It hasn't leaked in 5 years that I'm aware of.

That tank only had one hole though, not like the 70 tank

Your results may vary, of course. I block sanded the mating surface section of the X tank to make sure it would seal

Sent from my Z958 using Tapatalk

[Quinc]

I have some aluminum tubing coming from amazon and am going to make my own. I will post pics on how it turns out.

[yaegerb]

Yep that’s it , simple part .
Bolts to the bottom of the tank and two fat o-rings seal it .
Problem is , the plastic warps over time and the o-rings can’t seal tightly , or it just cracks near the nipples .

I hate it when it cracks near the nipples!