250es pinion bearing

[whiteman350x]

Anyone have any tricks to removing inner pinion bearing (just the outer race, rest is gone) from a 250es diff? Have 2 to get out and will have these trikes on the road. Thanks.

[shortline10]

You have to remove the wire clip that holds the bearing from moving and then you’ll need a blind bearing puller , the kind with a slide hammer , some times heat is needed .
These are very tricky to get out and if you’ve never done one then your probably better off paying someone that knows how .
I’ve been doing them for over 30+ years and I still find it difficult .