83 250r frame gusset

[Lil Earl]

I was looking to see if anyone had any input on where to get or if any of yall make a frame gusset kit for an 83.
Thanks https://uploads.tapatalk-cdn.com/20200902/c47cd4f943cf561a68968ffb91452c45.jpg

Sent from my SM-G970U using Tapatalk

[Dirtcrasher]

Does that model have weak spots?? Some Honda frames just aren't prone to cracking...

[Lil Earl]

Does that model have weak spots?? Some Honda frames just aren't prone to cracking...Both my bike and the parts pile I just bought are cracked in front of the motor where the neck comes down. So I assumed that these were not the strongest

Sent from my SM-G970U using Tapatalk

[Lil Earl]

Both my bike and the parts pile I just bought are cracked in front of the motor where the neck comes down. So I assumed that these were not the strongest

Sent from my SM-G970U using TapatalkMy frame is just at the front right now. But the spare frame is split all around. So I was not sure about doing the whole frame or just working on the front there https://uploads.tapatalk-cdn.com/20200902/940b61182bacee262cdaef4b824e8c7c.jpg

Sent from my SM-G970U using Tapatalk

[HondaRidr]

That's interesting. I haven't heard about people having frame issues with the second gen Rs or seen a gusset kit. You will more than likely have to make your own unfortunately.

[ATC King]

I'd be more concerned about the rust.

There are some bubbles under the paint. You did post a picture with it in the middle of a creek...