Looking for pics of 86 350x Grab Bar Mounting

[wonderboy]

Hey guys, I can't find any good diagrams of the 1986 grab bar mounting on the frame. I know there are toolbox spacers, but I'm curious if there are any spacers placed between the grab bar and the frame itself. On the 85, there are the rubber isolators and bushings to space everything just right, but the 86 lacks these. I just want to make sure to bolt this up properly.

[wonderboy]

Ok, I figured it out... wasn't really anything to figure out. For some reason I thought there needed to be spacers. Heard from a few people that none were needed. The spacers are only for spacing the toolbox away from the bar (if using one). I dug up three M8x16 bolts and then the larger M10 where the muffler will attach. Piece of cake!

Thanks to dirtwheels for the super clean grab bar!

266330266331

[dirtwheels]

Glad to help you out with your project. It looks good on there.

[wonderboy]

Ignore the scuzzy dirty frame and swingarm... this project isn't getting powder coat yet. I'm gonna get it all back together and mechanically sound before making it pretty some time in the future (after the toy fund bank balance recovers a bit).