RenegadeMaine
04-01-2022, 06:26 AM
Hey everyone,
I've had quite a few ATC videos on for a while, but I decided to start a new series as I tear down and rebuild my ATC200E right down to the frame.
I have a plan to strip it to the frame, rebuild the engine in my machine shop (boring .25mm over, hone, line up crank, new bearings etc.) and put new plastics on.
If you're interested in following the process I'm going to have a series that should have a new video every few weeks.
https://youtu.be/A68guP0YOKM
I've had quite a few ATC videos on for a while, but I decided to start a new series as I tear down and rebuild my ATC200E right down to the frame.
I have a plan to strip it to the frame, rebuild the engine in my machine shop (boring .25mm over, hone, line up crank, new bearings etc.) and put new plastics on.
If you're interested in following the process I'm going to have a series that should have a new video every few weeks.
https://youtu.be/A68guP0YOKM