anyone know the atc 250r 85-86 triple clamp rake angle?

[papasapien]

im mocking one up for a project but just need to know the built in rake angle the triple clamps have. please help if you know. thank you

[El Camexican]

This might be helpful
http://www.3wheelerworld.com/showthread.php/176568-Rake-and-trail-for-dummies

[rpeters]

Below is a factory manual that has the spec on page 1-3, however, for some reason, I think they may also have staggered tripple trees, meaning the offset of the top one is different than the offset of the bottom one. Someone here may know for certain.

http://www.oscarmayer.net/atc/manuals/honda/atc250r_85-86_servicemanual.pdf

[El Camexican]

You can pass this on to your friend Mike.

269612

[rpeters]

Ok, apparantly I can't read anymore, lol. I thought you were asking about the angle of the steering head which you clearly were not.

The offset (stagger) in the tripple trees is 6 degrees according to Jason Halls post that elcamexican posted.

There is a ton of info in the thread elcamexican posted.
,