86-87 200X 85-86 350X FRONT FENDER BOLT PATTERN needed

[oldskool83]

Hi,

I am converting my 83-85 lower triple to run 86-87 200x front fender. I do not have an OEM fender to check dimensions off. I do not have a 350x fender either, which uses the same bolt pattern.

Can someone let me know what the bolt pattern is. If not I'll need to buy a wasted fender. I have a 2nd gen 200x lower tripple but I must of pulled the wrong one and sold it by accent or something. It's gone non the less.

I have a new white 86-87 200x maier front fender and only want to drill in the OEM pattern so I can then have my threaded bosses welded into into the 83-85 200x I have here that is a spare. Trying to use what I have here.

[Red Rider]

Do you know if the 85-86 250R is the same as the 86-87 200X? If so, I can measure that for you when I get home.

[oldskool83]

NO 3rd gen r is the same as 2nd gen R and 1st gen 200x

[Footy]

I can measure mine this evening. Let me know exactly what you want measured . front to back and left to right etc.

[Shep1970]

This is within a mm- 86-87 200x center to center

https://uploads.tapatalk-cdn.com/20220919/b4b5c9bcd6e3e4e20f0ed96a8fb7c36d.jpg


shep


Sent from my iPhone using Tapatalk

[oldskool83]

Thanks now I can not destroy a nice fender