View Full Version : Pit bike motor in atc70

10-27-2022, 09:38 PM
Have seen this swap done before with electric start engines. Had a zongshen 110cc pit bike motor bolted it in the atc70 frame now I can't start it because the kicker hits the exhaust. Anybody got a remedy for this. Don't have fenders on it right now.

10-29-2022, 09:29 PM
My guess is that you'll have to modify the kicker so that it will clear.

11-21-2022, 10:39 AM
For now I think I'll make a grab bar and pop start it. Maybe I'll find a kicker that has more offset than the one I have there's a lot off cheap chinese bikes out there.

04-05-2023, 06:45 PM
You can flip the kicker fwd and pull up on it to start it or buy a seat flip kit like mine

05-08-2023, 01:03 PM
I'd also need wheel spacers to use the kicker. Got the tires holding air filled the carb bowl with fuel and put it in 2nd gave it a push it fired right up. Just picked up a plastic Clarke tank but the carb doesn't have a on off valve will a atc90 carb work.