350X owners, a little help please?

[Scootertrash]

I don't have access to a 350X locally, so I could use a little assistance. However, if someone is local to MPLS or the NW suburbs and would be willing to let me measure their machine....:naughty:

Looking for a couple of measurements for the front forks on the 350X. Not sure if 85 and 86 were identical, but measurements from both would help me to see any difference.

I'm looking for the measurement from the centerline of the front axle straight down to the ground, hopefully with a decent tire mounted, not a decades old one. ;)

I'm also looking for the measurement from the centerline of the axle to the bottom of the taper/radius at the top of the shock.

TIA

MS Paint for clarity:

270627

[Footy]

I can check that for you. Remind me via PM this evening. At work at the moment.

[Footy]

From the center of the axle bolt to the floor is about 10 & 5/8 inches.
From the center of the axle bolt up to the taper in the fork is about 9 & 1/2 inches.
This is using a Kenda front max size 23x8x11 with 3.5 psi.

[Scootertrash]

Thank You!