ATC70 build

[brau46]

Hello all, I am trying to get this ATC70 running for a friend. It has compression now just need to figure out how to run the “wiring” to get spark. I bought a kill switch as it didn’t have one but not sure how to hook it up between the kill switch, CDI, and the plug coming out of the flywheel. From reading the plug has the options for lights which I don’t need. Basically trying to figure out what wire I need and how to connect it all. This is what I got I can get more pictures whenever. Thanks for the help!

https://www.dropbox.com/sh/bp7frcvyyvpzouj/AACJaJt-RDyS6fZAf-zwgBHUa?dl=0

[shortline10]

The white plug is an accessory for lights , not needed for spark . You need to run that single black wire to the hot side of the coil . That’s it , if the points , condenser and coil are good it should have spark now . To hook up a kill switch connect another wire to that black hot wire and hook that up to a kill switch , hot to the open side of a kill switch and the other to ground .

Also the factory ignition has no CDI .