Harycackalingus
06-30-2023, 11:39 PM
Got this 200s recently and started tearing into it. I have a xl185 cam and a 200x piston for it. I wanted a little a bump up in the compression. I am still looking for a carb. Was thinking 24mm carb would be good. Pretty sure the 200x and xl185 used a 24mm one. Having trouble finding either 24mm or 26mm keihin carb. Bike came with a Chinese carb. It would bog real hard when grabbing lots of throttle. Still need to buy an exhaust for it. Thinking DG or the ebay crf230 one. I will be pulling the engine. Powder coat the frame and front forks. I have a pretty good powder color match for the forks. Not sure what to do for the tank yet. The tank is really clean inside, just needs to be re painted.
Mocked up some of the new parts before complete tear down.
https://imgur.com/a/5BBU2Hz
Mocked up some of the new parts before complete tear down.
https://imgur.com/a/5BBU2Hz