View Full Version : 125m color wiring diagram.??ANYONE???
WannaRace400ex
04-25-2004, 10:30 PM
I need a 125m wiring diagram anyone have one?
Thanks Eric
1985 200s
04-27-2004, 08:40 AM
what year?
WannaRace400ex
04-27-2004, 08:53 AM
well the wiring is from a 1986 trx and I'm using it on a 1984 125m motor
Howdy
04-27-2004, 09:01 AM
well the wiring is from a 1986 trx and I'm using it on a 1984 125m motor
Completely different set ups. I don't think it will work. But you might be able to prove me wrong.
Howdy
1985 200s
04-27-2004, 09:02 AM
I do have both those schematics and there is quite a bit of difference.
WannaRace400ex
04-27-2004, 09:15 AM
whats the diffrence is there anyway to make it work that you see? I just want it to start is there anyway to bypass all the electrics and just go from the coil to the cdi to the switch?
Howdy
04-27-2004, 09:22 AM
whats the diffrence is there anyway to make it work that you see? I just want it to start is there anyway to bypass all the electrics and just go from the coil to the cdi to the switch?
Honda changed soo much stuff on the 86-87's. To me it would be easyier to make a wiring harness for the 84 rather than trying to retro fit the 86 one. If you need a 84 harness I might be able to help you out.
Howdy
WannaRace400ex
04-27-2004, 09:25 AM
will that work to make my own? I just want to get it to run, I'll worry about electric start later I have all the stuff to make my own If you can give me some direction.
Thanks Eric
1985 200s
04-27-2004, 10:23 AM
Don't know if this will work but heres a diagram.
WannaRace400ex
04-27-2004, 10:44 AM
the only problem i have now is the cdi that I have has six wires and the one the diagram calls for only has 5. Is there any way to use the wiring from the old 110 motor? Or maybe combine the 2 together?
1985 200s
04-27-2004, 12:03 PM
What the diagram shows off the 86 trx is that that sixth wire goes to reverse switch and reverse indicator light. It would be the one on the far right. There are two wires and four wires. It would be the furthest right in group with four wires. All the other wires in order from left to right hook to the same things on both CDI's. I'm not sure of the internal workings of the cdi's are the same but I would assume so.
WannaRace400ex
04-27-2004, 12:46 PM
what color is it?Should I just cut that one off?
1985 200s
04-27-2004, 01:01 PM
Gray. Just tape it off.
WannaRace400ex
04-27-2004, 02:41 PM
Alright I did everything, and there is still no fire at all. I guess I'll have to try and find someone with a wire harness. Anybody have any other ideas?
Thanks Eric
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.