tri-z intake boot

[whiteaz92]

hey i was wonderin what kind of intake boot i can use instead of the stock boot. i wasnt sure if any of you have come across anything like this please let me know it would help me verymuch and if u do know of any can u tell me the way the manifold bends <such as is it the same does is curvemore the right donw um orwhat thanks for any help possisble im hoping to send pictures of my tri-z blaster and jus to let u know i did stomp a yfz 450 today

[GreenBoy]

I know for sure that the boyesen radvalve of the earlier YZ 125 fit the
Z cylinder, so I would look on the parts fish and try to find
a suitable YZ 125 boot.
The cylinder on the Z is a 250 from the ´83 YZ 250, but without the
YPVS outlet Yamaha uses a smaller intake on the Z, so look for
125cc parts.
Best wishes
Hagen

[Billy Golightly]

An intake boot off of an 83 IT250 will fit but the throat will be slighly larger. This will help accomodate an oversized carb if you ever decide you want one.

[J.D.]

Also, an 88-92 YZ125 one should work(maybe) because the reeds are interchangeable.