Any one with a 350x...

[AirManCam]

I am going to pic up a dg stage 3 xcellerator pipe for the 350x, I also have a 6pack rack and a baja bar. I am thinking this is going to be a tight fit..will it work? Thanks, Josh

[BLAZERONE22]

http://images.snapfish.com/33%3A8693523232%7Ffp3%3B%3Dot%3E2324%3D589%3D656%3 Dxroqdf%3E2323438843295ot1lsi
http://images.snapfish.com/33%3A8693523232%7Ffp3%3B%3Dot%3E2324%3D589%3D656%3 Dxroqdf%3E232343883%3C843ot1lsi



I don't think a six pack rack will fit, I have not tried but I've looked it over. I'll have to pull the prm rack off the autox to be sure.

[200xman]

Here's mine with a baja grab bar. The frame is a little tweeked :( but it still fit when it was straight.

[ScottZJ]

Well I added the Stage I to my 350x but it didnt fit with the stock header. so I had a muffler shop cut it and reweld it to better fit. I also had them make it shorter so it didnt stick out as far as normal, just to clear the 6 pack rack. The weld is under the seat so doesnt look bad at all.

http://www.fototime.com/{381FE2AB-1064-4CEB-A475-942038FBEC53}/picture.JPG

[vartiak15]

hey blazer wana sell me that x?

[AirManCam]

Thanks for the feedback guys, I guess i'll have to make it fit :(

[350x'inNY]

Or you could get rid of the 6 pack Baja bar.....