PDA

View Full Version : Yamaha Tri-Z



Tieman
09-11-2004, 12:30 PM
I am re-building a Tri-z can anyone tell me where the 2 pipes from the Coolant tank connect to please?

MTS
09-11-2004, 01:38 PM
one should connect to the over flow tube by the cap on the rad..and the other one im not to shure of..im no tri-z expert but they should both connect to the rad somewhre i would think..

TTribaLL
09-11-2004, 05:39 PM
Take a look at the Manual's (http://www.3wheelerworld.com/SMYamaha.shtml). For the 85 TRI-Z the rad diagram is on page A5.

OldSchoolin86
09-13-2004, 11:43 AM
The lower hose on the tank goes to the radiators next to the cap and the upper hose is a breather hose that connects to nothing. My Z didn't have one when I got it so I don't know the exact routing. Good luck.

TimSr
09-13-2004, 12:03 PM
The vent hose normally routes up the left side to the gooseneck/handlebar area where it more or less "hangs".