PDA

View Full Version : 200x with 200s motor and 350x suspension


honda200sx
09-28-2004, 10:46 PM
Trying to upload my pictures but they are to big, can anybody resize them.
Its a 200x with cobra exhaust, 200s motor with a 10:1 piston, 350x front forks and rear shock, and axle extenders.
woodstockii
09-28-2004, 10:58 PM
cool I got a '85 that I did the same down to the 10:1 and cobra, I still have the stock suspension .

What did you do for rear brake? The stock pedal wouldn't work for me from either machine. I tried running a brake line from the handlebars using 3 different master cylinders had no luck...wasn't working for some reason, it's possible I got too big diameter hydralic line made?


As far as your pictures, you should have aleast windows paint on that there computer you are on.. it can resize the pictures for you. Open the image up in windows paint the you can strech/skew it down and keep good quality..
MO350X
09-29-2004, 08:04 AM
I've used these folks with great success:
http://imageshack.us/index3.php

By all means, POST some pics!
I can't wait to see 'em. :)
smokinp
09-29-2004, 01:39 PM
post some pics,I have a 200x with a 200s engine and a 12:1 wiseco piston,I am goin to put a xr 200 engine in this winter.
83200e
09-29-2004, 02:11 PM
Check the sticky Howdy put in the open forum.
honda200sx
09-29-2004, 11:35 PM
ok here is a try
honda200sx
09-29-2004, 11:37 PM
one more picture tell me what you think? i may be selling this just because i have ran out of money and just bought a new house. How much do you think it is worth.
short4stuff
09-30-2004, 06:03 AM
thats nice ... but you need to make your pics BIGGER !
smokinp
10-01-2004, 12:01 AM
do you have a close up pic of it?the suspension setup on the rear?did you make the connector yourself?(I cant think of what its called right now :eek: )
MTS
10-01-2004, 12:05 AM
is the s and x motor the same..and where did you get the high comp piston for it..my friend is rebuilding his 200s this winter...
jmsmilin
10-03-2004, 07:31 PM
SO if a 200s motor bolts into a 200x, and Ive seen a 200s motor on a 185, then a 200x motor will fit a 185 right?
smokinp
10-03-2004, 07:35 PM
SO if a 200s motor bolts into a 200x, and Ive seen a 200s motor on a 185, then a 200x motor will fit a 185 right? why would you want to put a 200x engine in a 185?you would have power with no suspension.
MTS
10-03-2004, 08:14 PM
why would you want to put a 200x engine in a 185?you would have power with no suspension.
its called wheelie machine and then some :D :D :beer :TrikesOwn
jmsmilin
10-03-2004, 09:33 PM
wrongo, its got a FULL suspension, its the aftermarket frame but no engine in it. And I like clutches. Wait and see...
SO what enigine would rock it?
woodstockii
10-06-2004, 06:44 PM
My 200s motor had to be grinded on the underneath side to fit in the frame, it wasn't much just right around the clutch cover....

I just can't figure out away to hook up the rear brake pedal, The on the X motor the pedal is incorperated into the side case, on the S motor the pedal attaches to the frame...


What configuration did ya'll use?