Suzuki Flywheel Puller?

[TrikeKid]

anyone know where to find a flywheel puller to fit a 71 Suzuki TS125?

[TimSr]

Thats probably the most common puller out there, with fine reverse threads on the outside, and a push bolt on the inside. It works on a ton of 2 strokes. The same puller fits a TriZ or 250R. Im pretty sure thats the one you need. The way to tell is that its about the only one with a reverse thread, so all you need to do is check the threads in the flywheel that the puller threads into. If they area left handed thread, (27mm) you need Dennis Kirk PN# 28-1953 .

[TrikeKid]

thanks Tim

[rustbucket]

I have several ts 185 (great bikes) and I don't recall them having reverse threads but i never used that type of puller there should be three holes in the flywheel that fit in a crow foot puller

[TrikeKid]

got the puller and the flywheel off. now we just have to find a good left side case