200s rear axle wobble

[Yamahauler]

i am not to sure of the tech terms so please, disregard my stupidity. :(
anyways, on the 200s, the rear axle wobbles. it is because those 4 bolts that loosen the axle so it can move forwards and backwards broke off in the holes. i was wanting to know what parts i wouild have to buy to fix this.

sorry if it didnt make any sense. ;)

thanks
cory vrooman

[smokinp]

the same thing happenned to me...I took my axle off and redrilled the spot where the 4 bolts go in with a larger diameter drill bit so I could use larger bolts and then put the 4 larger bolts back in.When you have the rear apart take a look at the bearings...

[Yamahauler]

thanks man
anyways, you said you have been to melita a while back. who do ya know here?

[smokinp]

You must be getting me mixed up with someone else?I have not been to Manitoba before....I have a 1983 200 parts bike and I can sell you the rear end if you are interested?(it would save you time)just a thought....

[Yamahauler]

ok, it must not of been you that i was talking to before.
im still not sure if i am going to restore this bike. I have to get all new plastic for it somewhere. the pic of the old rear fenders is in my profile. But i'll let ya know if i change my mind.
thanks

[MTS]

you have to drill out the hold bolts take the brake rotor off and knock the old nuts off the back side of the axel ...just weld some new ones in that are welded good cuze the stocker ones are just tacked and its a trailprotrailprotrailprotrailprotrailpro when they break....lol