where does this go?

[kilabeez0]

I bought an auction off of ebay with some chain sliders and rollers for a 200x, one is a round wheel and one is a small J. It's not the long J that attaches to the swingarm though. Can someone tell me where they mount exactly or better yet show me a picture. O, and someone on ebay is parting out a 200x and they have this listed as the lower frame chain slider. this looks nothing like the small J shaped slider I have????

http://i3.ebayimg.com/03/i/03/2e/7d/02_1_b.JPG

[kilabeez0]

Ok I'm going to post a picture of a 200x frame, and then the 3 pictures of sliders, i'm assuming my small J shaped is the same thing as above. What I would like is someone to save the picture of the frame and insert little arrows as to where they go.


Here are the 3 rolllers

I know where this goes
http://i21.ebayimg.com/02/i/03/2e/41/6c_1.JPG

Kind of have an idea on this one
http://i22.ebayimg.com/03/i/03/2e/73/29_1_b.JPG

No clue on this
http://i3.ebayimg.com/03/i/03/2e/7d/02_1_b.JPGhttp://images.andale.com/f2/115/127/18224392/1102933533677_1104766313734_misc_017.jpg

[kilabeez0]

here's an auction with all 3. i know i'm getting carried away, but i've had these 2 rollers for awhile and have no idea where they go. my small J looks more like this one.

http://i24.ebayimg.com/03/i/03/25/7c/9d_1.JPG

[wanta86r]

not to be mean, but all of those rollers look like junk- you shouldve bought new ones instead- the big one goes on the front of the swingarm(aroun the left side of where the pivot bolt goes through)- the white one goes on the back left framerail)the long angled one) and the roller mounts below the airbox on the left side as well

[kilabeez0]

i didn't buy those, i'm using pics as reference. but thank u

[chris200x]

I tried to order a new chain slider for my 200x and was told they are discontinued!

[smokey]

slider mounts on the frame

[Billy Golightly]

White one on the frame inbetween the bottom frame rail and the swingarm, black J piece goes on the front of the swingarm, and the short section of the J wraps around the front and a little bit on the bottom. Round roller mounts on a bracket on the frame not far from where the subframe connects with the engine cradle.