Who else makes ATC Fenders?

[atctim]

Besides Maier-MFG, does anyone else still make and sell ATC fenders and platics? (Also other than OEM)?

[TimSr]

JC Whitney was carrying fiberglass fenders for some Honda ATC models. Not sure if they still do.

[ric]

Well, There's me... I make reproduction fenders for K0-K1 ATC70s, and K0-K1 @ 74 on ATC90s, plus ATC200e rear fenders, also fibreglass seat pans for various models, you can check out my range at http://www.atcheaven.com
go to the reproduction page......

[atctim]

Any plans on reproducing the ATC200 2 piece fenders?? No one makes them and no stock anywhere!!!

[ric]

Hey Tim

Funny you should ask, I have a set made up in my mould ready to go, these are ATC200e you are talking about right?? I made some moulds after restoring my 83 ATC200E a few years back, made my fenders in white just to be a little different, although most people would want them in red. Here's a pic in case you are interested??
http://www.atcheaven.com/Images/IMG_0970.JPG

[boogie5184]

ric do you plan on making any 250es rear fenders??

[TimSr]

You US guys might want to look up shipping charges from Australia before getting too excited.

[atcmatt]

I had a set of Ric's fenders on my old 200es. And boy was it sexy!

Good Prices and he even organised an easier way for me to pick them up. Good guy.

Hey Ric, any news on 250es fenders?

Matt

[hrc85250r]

fullbore makes 85-86 250r rears now...they are just the 250r 4trax ones cut different, but they do sell them specifically for the ATC 250R's

[atctim]

Ric,

Nope, sorry, not the ATC200e, but the plain old ATC200 (no letter designation on this one).

Thanks, though.

[TECATE CRAZE]

If anybody would be so kind as to pass on a leads as to what companies still make or sell race cut plastics for ATC ? I remember back in the day Maier did... do they still ?

[toyota200x]

Yeah I know a guy that really wants some atc 200 fenders. I wonder in Maier would make them if you asked?

D-man

[ric]

Hi Guys

No plans as yet on making 250ES fenders, Maier has them so my suggestion is get some of theirs,
Tim, not sure if 200e fenders would fit the plain 200, are yours seperate left and right??
Freight out of Aus is a little daunting, However I did send Mike Palmgren (vintagemotorsports) a couple of US90 rear fenders and 2 sets of K0 ATC70 fenders, cost about $180 for postage, or approx $135 US dollars, thats not too bad when you break it down per fender!!
Hi Matt, will get back to you on that one!
I cant see Maier making fenders for the 200, not unless you will willing to place an order for say 100 sets!! You could ask though, couldn't hurt.
Tim, have you checked Honda to see if they are still available OE??
Thanks Guys!

[MrDixie]

Ric,

Have you considered making the little triangular side pieces for the 250 bigred between the fender and gas tank, maier doesnt make them I dont believe, And I just watched (1) used one go for like 80.00 on ebay. I gave up on finding some good ones and made a pattern out of cardboard then cut them out of diamond plate aluminum and shaped them to fit.

[atctim]

MrDixie,

No one makes the side panels for the Big Red (85 and up)]

You have to get used ones on ebay or through a salvage yard. They are really hard to come by. I paid $40 for a nice set last year. If you wait long enough, you'll get a good deal on ebay.

I also thought the Big Red trunk lid was the same - not available , but I see them for sale in the J R Graham catalog now.
maybe soon we'll see the side panels in an aftermarket catalog too.

Peace