Question on Paul Turner ATC 250R Pipe

[markdb420]

I just bought a used PT High Rev Pipe, and was looking it over and it has an odd mount up near the front of the pipe and there is no mount in the middle of the pipe like normal other pipes. How would I mount it. It looks like I could use the motor mount area to mount pipe. Maybe it is just a different setup and maybe I don't even need to mount it if it makes a tight connection with the silencer. I will try and get a picture on tomorrow. Thanks :wondering

[MO350X]

Don't TRX250R pipes have the different mount point as well as a different angle of the outlet of the expansion chamber??

[Derrick Adams]

Use your old exhaust mount down at your motor mount. Bolts right up and provides extra stability.

[markdb420]

Derrick that is what I was thinking. It looks like it'd bolt directly to the motor mount area. Thanks. I cannot wait to get this thing on! Went to see the sandblasted frame and drop off all the little parts that were forgotten when the 3 wheeler frame was dropped at the painters. Did some resto work to my Bayou, new OEM front bumper, and grill. My 86 250r will be something different on a 86 250r. Well, like I say I'll take that advice and Git R Done! :D

[markdb420]

Here is the picture of the mount.

[3leggeddog]

you want to use the bottom motor mount bolt,and make sure you leave it loose on the frame so you can move it around to start the bolt into the pipe.your definitly gonna want to jet it,i called duncan racing and they were within 1 jet size.