setting timeing on a 200s

[threewheelin-feelin]

well guys....i need some help....i have never set timing before....and i cant get this thing running.....if some one could exsplain i to me...and give me the correct specs it would be a great help....i know i have to take the cdi cover off.....and the little fly wheel thing.....please help me out guys

[hotroddal]

ok first off, take the spark plug out and make sure the piston is at top dead center you can check this by looking threw the spark plug hole, once youve done that, pull all the cdi stuff off and aling the small "o" on the cam gear with the "v" cutout in the top of the head,then once youve alinged those if you take the plug out of the case by the rewind you should see a small "F" mark on the flywheel,then put the cdibase plate back on and make sure it is perfectly straight, and align the line on the thing that slides over the camshaft with the line on the black plastic thing on the baseplate then once youve done that it should be good to go and should fire right up.

[threewheelin-feelin]

ok i will try that