'87 Honda 200x Question

[NolanS]

Is there a special Bolt for where the Exhaust mounts to the grab bar? A 12mm is too small and a 14mm will not thread. Any help would be awesome!

Thanks,
Nolan

[Richyrich]

Have you tried a 13? If the diameter is correct on the 14 but the threads cause it not to start, you can hit it on a belt sander to knock the threads down a little. Just a backyard quick fix suggestion.

[Huffa]

Nothing speacial about it. The head size is unimportant. it's the thread size that is. I'm sure you can find one at a hardware store.

http://houseofmotorcycles.bikebandit.com/partsbandit/assets/schematics/Honda/H00930048.gif

To enlarge picture just put the mouse on pic and a little icon will come up you click on........in case you don't know.

1: GASKET, EX. PIPE
(A) 76424-001 $2.47
2: GASKET, PROTECTOR
Fr_Sr_No_To GM022084 76287-001 $2.76
3: MUFFLER
70142-001 $248.69
4: PIPE, TAIL
70436-001 $42.95
5: PIPE, EX.
69481-001 $92.58
6: PROTECTOR, EX. PIPE
69672-001 $30.93
7: BAND, MUFFLER
72249-001 $12.67
8: LID, MUFFLER
72216-001 $5.84
9: GASKET, MUFFLER LID
72270-001 $2.78
10: GASKET, MUFFLER
71446-001 $10.96
12: STAY, RR. FENDER
99045-001 $6.80
13: BOLT, CHECK (8MM)
(8MM) 81099-001 $5.84
14: SCREW-WASHER (6X10)
233497-001 $2.71
15: NUT (6X15)
236323-001 $2.87
16: WASHER (10MM)
Fr_Sr_No_From GK508519 237524-001 $2.47
17: PLUG, HOLE
241410-001 $2.23
18: BOLT-WASHER (6X12)
(6X12) 246434-001 $0.62
19: SCREW-WASHER (6X12)
(6X12) 247923-001 $0.53
20: BOLT, FLANGE (10X16)
254487-001 $1.08
21: BOLT, FLANGE (10X25)
(10X25) 254491-001 $1.25
22: BOLT, FLANGE (8X32)
(8X32) 254467-001 $1.05

[travisg75]

I am almost positve mine was a 12mm, check the bolt hole to make sure yours is not stripped. If it is tap to the 14mm and it should be ok.