Need a screw for 200x engine

[bassman]

I was riding it about 10 mins ago and the screw came out somewhere. I have idea when or where but I noticed there was air blasting my leg. I was thinking that isn't right. So I look down and there is air/oil mix coming out where a screw should be. It is on the left side of the trike, toward the middle of the engine. Does anybody know the size or where I can get one?

[jeswinehart]

can you do up a pic or go to bikebandit.com and point out in a little more detail as to what area on the trike you think it is ??? i'd be willing to bet most of us folks on the boards here have trays full of spare nuts + bolts. i for one do and don't have no problem giving you one you need (cover shipping please) but want to be sure too get it right the first time around.

air/fuel mix ehh ,,, are you sure the crankcase vent tube hasn't come off
( and that side case bolt has been gone for some time now ??? )


thanks,,, john

[bassman]

No, I'm sure of it that it just came off. I never felt the combusted gases before. I am looking at bike bandit, but they are SOOOOOOOO slow. Starting to make mad. I'm sure it is a bolt/plug of some kind because it has threads.
I THINK it is Part #4 and #11 on this diagram:
http://houseofmotorcycles.bikebandit.com/partsbandit/oem_schematic_view~mp_id~~mscssid~MQG95RUPFHA69N4Q R7M4RMNG3H3C1484~schem_dept_id~179359~section_dept _id~1~section_dept_name~OEM+%28Stock%29+Parts~dept _type_id~2~model_dept_year~1983~model_dept_mfr~Hon da~model_dept_id~179187~model_dept_name~ATC200X.as p

[Dammit!]

Dude that's the oil drain. If that came off I hope you stopped riding it immediately. Is there any oil left in the thing?

[Dammit!]

Look at these pics. Is it 1, 2 or the oil drain?

[bassman]

It is #2.
I still have 1/2 oil though....I think. I've never read dipsticks like this.

[Dammit!]

That's the just the timing plug (or whatever it's called, I can't remember). The oil drain would have been a lot worse. Obviously you don't want to ride it until you can replace it though.

[jeswinehart]

#7 0r #8 ( or both??? ). http://www.bikebandit.com/partsbandit/oem_schematic_view~mp_id~~mscssid~EAR60J8R5*6R9HCQ TQUKWUGAB4GX9570~schem_dept_id~179505~section_dept _id~1~section_dept_name~OEM+%28Stock%29+Parts~dept _type_id~2~model_dept_year~1985~model_dept_mfr~Hon da~model_dept_id~179189~model_dept_name~ATC200X.as p

dammit's right ,,, what ever number you posted is the oil drail/filter thingymabob.


john

[bassman]

It is #7. The smaller one. Anybody know where i can get it at a REASONABLE price? Do you think my local honda shop will carry it?

[thefox]

Well Bikebandit lists it for $7.40 so it will be about that much any where you get it. Without knowing your local dealer I can't say if it is something they would have in stock or if they would have to order it.

[jeswinehart]

yep,,, pm me your address or email it to me and i'll get it out to you in the morning. jeswinehart@hotmail.com

no charge friend.

comes off this 50 dollar beater i picked up for a few parts.

going to bed now. john

[jeswinehart]

hey,,, for the rest of you folks ,,, it turns out bassman is only about 40 miles from me ! small world sometimes :)


john

[vartiak15]

* could of also used a rocker cap for the oil drain im 99.9% sure they are the same

[bassman]

lol, you even knew the 1 attraction that this tiny town is known for.