2 cycle

[ras86]

Whats the best premix oil for a 2 cycle

[bigredhead]

That's a matter of opinion..... the best answer i can come up with.

The one that performs the best for your personal taste, jetting, conditions etc...

no #1 winner in this game.

[LonesomeTriZ]

Boy, isn't that the truth?

[Blown 331]

I run Honda synthetic. Just my opinion but who knows more about the engine requirements than the people who designed it.

[OldSchoolin86]

who knows more about the engine requirements than the people who designed it.
IMO that would be the people who make a living with and specialize in petrolium products.

Ras, what is this for?

[hrc85250r]

32:1, play it safe and use the general mix ratio, this will work with pretty much any 2 stroke oil and any 2 stroke motor out there.....i also have a friend that races pro in canada on a ktm that runs 16:1 no matter what....hes really really good too

[crackshot]

castor all the way.

[ras86]

well i just wanted to find out some of the brands that you guys were using so that i could try some different ones out and see what it likes better. for a non modded motor what would a good trail ratio to go with

[BIGCRIP28]

amsoil, bel ray, blue marble, klotz
thats what a lot of people use.

[rustbucket]

it depends some what on whether or not your using the premix or injector. most injector systems are designed on a certain weight of oil such a 10w40 a sae 30 the reason is the ventury on the ports and stuff are big enough to allow that type of oil for proper mixing. i know the suzuki ts tm and tc bikes are supposed to use 30w suzuki cci oil.

[twgranger]

I like using klotz synthetic oil at 32:1

[ras86]

have you guys hurd about the oil block off thing so you can block the oil injection off and pre mix it

[BIGCRIP28]

have you guys hurd about the oil block off thing so you can block the oil injection off and pre mix it

yeah, what about it?

[ras86]

how well does it work would it mess with your motor or anything like that because i was thinkin about getting one for my blaster

[BIGCRIP28]

id get one. then all you have to do is premix your gas. you wont have to worry about if the pump is working properly and if your engine is about to blow.
they work good. we put them on dirt bikes, quads, and even on a boat motor.

[rustbucket]

some bikes you can do it on some you can't I know on all the suzuki bikes the left hand crank bearing and the rod had oil running directly to them and the other side ran in the tranny oil. so my advice is take a look at it first if the oil only runs to the cylinder then do it if you want it won't be the same since the pump is designed to pump out a specified amount of oil at at certain rpm and throttle level when you gas it its 20:1 when cruizing 50:1

[ras86]

well do you know anything about blasters because this kinda stuff is pretty new to me i had 4 strokes for a long time

[BIGCRIP28]

you can put one on a blaster.

[rustbucket]

never monkeyed with a blaster i don't touch four wheelers

[bigredhead]

Why a kit ?

Can't you just empty the 2 cylcle oil can... and just mix the gas ?

[rustbucket]

don't just empty the oil tank because it will create an air leak if your going to to something like that just take the bolt that holds the line on and replace it with a solid bolt.