please help me

[honda110]

i have a 1984 honda 110 3 wheeler and i got a new head for it because the spark plug hole was stripped out on the old one. when i put it on i bumped the timing sproket and it moved. there is a t with a line next to it and a f with a line next to it does any body know which one im supposed to line it up with

[Blown 331]

Use the T.
I think that one is for valve timing and the F is for ignition timing. I'm not totally sure about that but I do know you use the T for sure.

[honda110]

i tried the t and the f and the f didnt do any thing and the t just popped a lot and it still wont start i dont know what is wrong with it it has fire and gas a good air filter i cleaned the carberator out it has to be the timing

[honda110]

does anyone know something i could do to it to get it running

[honda110]

anybody please?

[trainingwheeler]

if it just pops alot then it sounds like the timing is off 180 degrees take it apart & rotate the cam 180 then try that good luck!

[TimSr]

anybody please?

Please be a little patient before bumping your post!

We do not have "operators standing by" 24/7.