Nousagi X192 is up and running.....

[NOUSAGI]

yup she started only right after i put starter fluid in the carb --- she runs great one thing tho it leaks from the carb drain bowl screw thing - im sure im gonna have to get that from the carb rebuilt kit --- WOW she is fast - its been great project a few headaches but darn well worth ever drip of swet.... is the shifting suppose to be kindof hard cuase i thought after the bike gets going it shifts easy but guess not another thing is i have to when like if i were to take it to 3 gear then id have to shift 3 back up to nuetral? one more thing like when im in 3 and want to stay on 3 and i slow down could i just leave it on 3 and just give it gas and keep going will i ruin any thing by doing this? it back fires a little so i think its a little rich right now the needle is in the 3 position im gonna move it down 1 into the 4th . i see now how much fun those trikes could be im flying aready only on 2 ................theFOX if you read this i dont need those part and check your pm .................................................. ......other than that would i be able to put a automotive tach to the coil and will it work? :(

[Tri-ZNate]

wrong forum. ;)

And the leaving it in third thing wont hurt it.

[MTS]

Man that thing looks like some fun! did you build the frame yourself or use a small bike alredy? i ask becuse i may make one with a 80cc pinger in it to race in the mini bike class at the local track...

[NOUSAGI]

from a x2 frame came added support and re constructed mounting position. i wish we had some sort of race league but we only ride empy parling lots and well i ride to the distination, thats pretty cool but were not suppose to cuase there not street legel but if their was a track i sure would be their........

[bigredhead]

on these old 200's... N-1-2-3-4-5 and back.

You can keep it in any gear you want as long as it has enough power to pull it. otherwise you'll wear the clutches out.. but at the weight of that thing.. i bet you could take off in 3rd.. LOL....

Do you have it auto-clutch or manual ? what was the 200 motor from ? a 200 X.. S, M. E. etc.....

[NOUSAGI]

would yall guys mind going the thread that i started with im gonna finish posting on that one i forgot about it -- thanks check out the lastest news - see yall their.............................Pete