servicehonda.com

[bigredhead]

what the hell.

how do you find ATC stuff on that site ?

I looked up and down left and right but canot find squat.

what did i miss ?

[250r'en +TCB]

OK here we go........
In the middle of the home page it says "Guenine parts finder", click it.
On the next page you see several colums, scroll down the ATV one and click on the "Improved! View all models!" in red type.
Read the next page, you got dial up, your screwed! If not then click "Click here to begin".
The connect button will proubly be a light grey and you can't click it, right? A pop-up should appear that ask you to install software, click OK or YES. Then you should be able to connect.
When you connect don't touch anything till the whole page loads! The whole screen should be covered with grey, at the top left hand corner there is a little book "open catalog" Click it.
It then brings you to something that says, ATV, motorcycle or whatever...Click ATV!!!
After that it brings you to a list with ATC's at the top. You won't find your exact model there, just the CC amount.
For instence I have an 1985 250r ATC, so I click "ATC250" It brings me to the big red, 250r and another one I forget....When I click 250R It brings me to 1981-84 or 1985-86. So I click 85-86.

If you follow my exact instructions and read the rules for what you need to open the service manuals YOU WILL BE SUCESFUL!!!
PM if you have any questions........my fingers hurt from all the typing.......

[bigredhead]

OH MY GOD !!!!

Sooooooo.. i noticed the Req'd S/O and O/H at the bottom of the page......

On Hand
Sold Out
Req'd = required ???

Can you order stuff and pick it up at your honda dealer locally ?

[250r'en +TCB]

^^^ not sure about that???? Call service honda or your local dealer and ask!

[bigredhead]

I will.

Thanks dude !!!!.. ( Can't beleive i could'nt figure that out.. but damit i could'nt ! )

[Vealmonkey]

I believe when it says required it will give you a number, that number is how many it takes to put this part together. Like, 8- 6mmx35 panhead screws... if the number required is 8. Or on shock boots 2 , one for each fork tube. I hope this makes sense.

[bigredhead]

Yeah... that's what i figured after much thought.

How do you determine if it's available or not tho ? or is everything listed available ?

[Maine_Triker]

According to Service Honda the OEM 250r speedo kit is still available.... so that goes to show you that just cuz they say it's available doesn't mean it is!!

Take the PN's to your dealer and run them there to see if the parts are still available.

Phil

[nouseforaname90]

My god.. $230 for a SX rear fender..