atckowalski
08-01-2005, 06:35 PM
I bought my 350x with 2 sets of front forks.The set that is on it now are trailing the axle and the caliper is on the right (wrong) side.So I switched everything around thinking it was backwards and it turns out that the caliper is now leading the fork and should be on the backside of the fork.That got me to wondering and it turns out that I think I have the wrong forks and triple trees.So I measured them both to find out. The extra set I have measures 1 and 3/8 inches wide by 35 inches long. The set on the machine are 1 5/16 and 32.5 inches. Colud someone measure there shocks and tell me which ones are right? Also, if possible post a pic of there triple trees :wondering Thanks!