PDA

View Full Version : Advice Needed 350x Axel


pops
08-28-2005, 07:51 AM
Could any one please help out I bent my axle on my 350x today I need to know if any other axle will fit please. .(Shame job bent it trying to do same jump as my wife on her new 400 ex.)
brendan802
08-28-2005, 08:16 AM
The 250r and 200x axle look about the same to me. I'm not 100% sure though. I just pulled a axle of a parts 200x. Do you want a pic to compare? :TrikesOwn
pops
08-28-2005, 08:29 AM
Yes if you could please that would be great thank you .
LaDano
08-28-2005, 08:29 AM
I'm pretty sure the 300ex axle is the same.
brendan802
08-28-2005, 08:41 AM
It's about 33 1/2 inches long and 1 3/8 wide in the center between the rotor and sprocket. Here the pic. I hope this helps. :w00t:
brendan802
08-28-2005, 08:46 AM
I was just looking at bikebandit.com to compare and the sprocket mount is different. If the splines are the same and the length is too then it should work. Also the 250r axle is part number 145642-001 and the 350x is part number 145644-001 and the look about the same. It just the length and spline size you need to worry about. Good luck :w00t:
pops
08-28-2005, 08:59 AM
Thanks brendan 802 Iwas just loging on to that site . I think i will go with a aftermarket axle there seems a lot on ebay.I just have to make sure that the on i get is right for my x. Freight alone is $130.oo aud.cheers.
pops
08-28-2005, 10:29 AM
No luck finding same part no for 350x axle on bike bandit What aftermarket axle would be the best to buy.Please.
pops
08-31-2005, 07:40 AM
Now i realy do need a axle our local shop here said that they could fix it they heated it up cheery red and tried to straighten .The bend is worse ,Throw away job.I am thinking of selling and buying a Quad .At least parts are not a prob.
SloPoke
09-01-2005, 04:19 PM
The axle on an 85 350X is specific to an 85 350X only.

I've been down this road before. :TrikesOwn
firefirefire90
09-01-2005, 05:17 PM
Bend it back to shape, the only bad thing is that it will be weaker. Buy a durabluel. Or trade er for an ATC250R, least * will be able to keep up with ** wife.
NOS_350X
09-01-2005, 08:37 PM
The 350x can use a 300ex axle. Other than that you need a 350x axle.
pops
09-02-2005, 08:04 AM
Thank you for the help guys I got a new old stock axle for my x today from the USA (me very happy chappy.) Wife not happy though I pulled her axle last night to try on my x did not fit . ( mmmm must remember to put it back on her quad one day. :l :naughty: : Thanks again all. :beer