200X to 300EX rear hub swap

[200xman]

Here is an easy way to gain 2" in width on your bike without goofy spacers or having to buy an extended axle. It should work on all sport trikes except the 85-86 250R,350X and 86-87 200X. The 86-87 200X comes with the same hubs stock. It's also a great way to get a 4 on 110 pattern on the 81-82R. The only thing you may have to do is bevel the tips of the hubs past the stubs to clear the weld on the inside of the rim. Enjoy the pics.

[Troll 2]

Great tip, now I need a set! Hmm.................. :beer

[mx600]

I put 400ex rear hubs on my '84 200s. Coupled with 250R rims (not sure if the offset is very different from 200s), the rear is pretty wide.

I checked a bunch of catalogs and on this board, and it seems most hondas use the same spline pattern. I think it's mostly 24 splines, but the 350x is 25? I could be wrong.

But, with the 4x110mm bolt pattern you get a ton more rim choices, which is what I was interested in.

[Dammit!]

I just realized yesterday that my '83 200x has those hubs on it with offset 250R rims.

http://www.3wheelerworldforums.com/attachment.php?attachmentid=16474