86 honda 200s

[86honda200s]

hi im new to the 3wheeler thing, a friend gave me a 86 honda 200s. not sure if its worth building ot not. right now im lookinf for a new gas tank, new plastics, and other things to help it look new, well as new as possible. if anyone can give me the name of a website or shop around the folsom,CA area that would be awsome, thanks

harrison

[Vealmonkey]

Welcome to the board, there is alot of good info and people around here. A company named maier makes plastic fenders, they are not as good as the originals but they are relatively inexpensive and available. There is a company named clarke and they make plastic gas tanks that will fit, they don't look as good as the original, but they don't rust or aren't rusty or dented. Your color choice is pretty much limited to red. Look on ebay for parts, some are even still available from the Honda dealer. Make sure to get your self shop manual for your trike. Honda manual is the best and most detailed of course buy a clymers manual is better than no manual at all. Your going to need metic wrenches and only use metric nuts and bolts to put it back together so you don't mess up any threaded bolt holes. Good luck with your trike and have fun.

[willcamach]

you can also check out chappral motorsports they have a website and are located in san bernadinp ca. they have sell maier plastics , clarke tanks, etc also try denniskirk.com

[Huffa]

I'd have to say ebay is the best way to go! That has it's own forum on here also but here is just one link(we are not supposed to discuss ebay on this forum) to get you going http://search.ebay.com/search/search.dll?sofocus=bs&sbrftog=1&catref=C6&from=R10&mppfqy=Honda+200s&mppfqy=Honda+200s&satitle=Honda+200+S&sacat=-1%26catref%3DC6&bs=Search&fmmk=&fmmd=&fylo=&fyhi=&mppfqy=Honda+200S&sargn=-1%26saslc%3D2&sadis=200&fpos=18080&ftrt=1&ftrv=1&saprclo=&saprchi=&fsop=1%26fsoo%3D1&coaction=compare&copagenum=1&coentrypage=search&fgtp=

Heck, they have 2 gas tanks right now and don't forget, it does not have to be an S model for some parts and at least 84-86 S's share the same parts.

You don't need a new tank, just get a nice used one on ebay. Same goes for the fenders, heck, same goes for everything! You can literly find any part you need for your 200 on there.

As far as plastic I'd rather have used originals then new Maiers for sure.