What other rear hubs fit a honda ATC 70cc

[svo58]

Will any other hubs fit a honda 70 rear,I want to put a 8" rims in the rear.My 70 ATC is a 1984.What hubs will fit to get a 8" rim in the rear.Any help would be great,thanks......svo58

[Trikeaholic]

I believe 200x 83-85 will.

[Howdy]

You have a wide range of hubs that will fit on your axle.
This is just a partial list:
For 8" rims:
ATC90 75-79
ATC110 80-85
ATC125m 84-85
ATC125m 86-87
ATC185s 81-83
ATC200s 84-86
ATC200x 83-85
ATC250R 81-82
ATC250R 83-84

The hubs from these machines below will also fit but they had 9" rims:
ATC185 1980
ATC200 81-83
ATC200e 82-83
ATC200es 84
ATC200x 86-87

I hope this helps. ;)
Howdy

[svo58]

Hey thanks for the info. It was a big help.Thanks again.....svo58

[ATCnut]

You can also use 300ex hubs, they give you 1" of extension on each side.

[42F67N]

dratv is also selling a 8 inch hub for the atc 70 now that converts it to 4 lug

http://www.dratv.com/trehubforad8.html

[edog]

Pm sent.........

[Howdy]

Pm sent.........

That is funny being this thread is almost 2 years old. lmao
Howdy

[AustenW]

Sorry to resurect this post but I am looking to put some alloy rear hubs on my ATC70 with 4/110 stud pattern

Will the TRX250 lonestar hub fit?

[3wheelrider]

Nope -wont work. 250R axle has more spline(thicker)....welcome to the board.:cool:

[AustenW]

so what alloy rear hub do I need to use to get 4/110?

I dont want extra width hubs as I'll be using 3/5 offset wheels (8x8 rim) so they will be an inch wider each side already

[3wheelrider]

None of these stock hubs are alloy. They are stamped steel & cast steel. The aftermarket ones are alloy or cast aluminum. All alloy/aftermarket 4/110 hubs are gonna have extra width. The 200x hubs are 4/110 but cast steel and give extra width too. Not sure what else you can do......

[AustenW]

OK thanks for the info, so what aftermarket alloy hub will fit that will only add 1 inch to each side?

[Quinc]

Bringing this thread back from the dead..

Do the 200x or any of other ATC hubs add any width to the 70? :wondering

[shortline10]

86/87 200x hubs will give you just under 2” added width .
Same hubs as the Trx300ex and trx400ex if your doing and eBay search .