klt 160 clutch plates

[dooner17]

ok I have a 1985 klt 160 and it has no pull cord so i can only jump start it. The clutch started slipping untill it ran no more. When I try to jump start it the motor never turned over but you could hear the clutches spinning. What are these things in the pic I've attached. They came outa the clutch that attached to the crank. If these aren't bad than the plates must be bad.

[dooner17]

Ok, I'm 95% sure what I have shown in the picture above is what's bad. I think there some type of clutch pad and they look worn. Does anyone know what they are. What type of clutch plate?. Can I still get them>

Thanks

[dooner17]

Anyone, I'd like to get this runnng

[dooner17]

Took them to my mechanic today and he said they were good. So I got a pullcord that works perfect from my friends junkyard. I also took the entire clutch assembly from a parts klt 185 bayou. The one way berring seems to be broken on mine so I'll change everything and see from there.