PDA

View Full Version : 1983 ATC200E Big Red



JdSpitfire_1979
10-28-2005, 09:31 PM
Hi Everybody, I have a 200E Big Red that will not charge more than 0.06 volts I have replaced the stator and nothing changes. I thought the old battery was toast so I replaceds it and that's when I found out it wasn't charging. If anybody can help with an answer to this problem because I can't go riding after work because it is dark and I want to get as much riding in before the winter sets in.
Please E-mail at Shelby_Extreme@hotmail.com

Thanks for your Help

ATCnut
10-28-2005, 10:52 PM
If the stator is good, then you need to check the regulator and all the wiring. Trike electrics are a PITA. A good wiring diagram is a must. You have to keep checking things one at a time until you find the problem.

You did check the fuse I hope???