atc200 clutch adjustment

[Kintore]

I found this thread
Link to thread on adjustment (http://www.3wheelerworldforums.com/showthread.php?t=28802&highlight=auto+clutch+adjust)

When Studytime in his first post says-
"So far, I've tried to adjust the slack (necessary as clutch shoes wear) and that hasn't helped much."

How do I do that? Thanks for the help.

[Howdy]

On the right side case you should see a nut on a slotted bolt( adjuster screw ).
1) Use a screw driver to hold the adjuster screw and loosen the nut ( normally about 1/4 to 1/2 a turn ).

2) Then turn the adjuster screw counterclockwise until slight resistance is felt, then STOP!

3) From this point, back out the adjuster screw clockwise as follows:
a) ATC185: 1/8 turn clockwise.
b) All other models: 1/4 turn Clockwise.

4) Hold the adjuster screw in place and tighten the nut.

5) Go take the machine on a test ride.

It's normally very easy!
Howdy

[Drockstar]

Will Do!!!! And Thanks!!!!